How to Fix No WiFi Networks Found in Windows 10

The WLAN network card drivers usually cause this problem on Windows 10. Other reasons for this issue are listed below.

How to Fix No WiFi Networks Found in Windows 10 Basic Troubleshooting Tips Method 1: Run Internet Connections Troubleshooter Method 2: Run Network Adapter Troubleshooter Method 3: Update Drivers Method 4: Roll Back Wi-Fi Adapter Drivers Method 5: Reinstall Current Wi-Fi Adapters Method 6: Change Adapter Settings Method 7: Reset Network Adapter Method 8: Enable Hidden SSID Method 9: Disable Faulty VPN Method 10: Run Malware Scan Method 11: Disable Antivirus Temporarily (Not Recommended) Method 12: Modify Services Configuration Method 13: Turn On Network Discovery Method 14: Contact Network Administrator

Incompatible or outdated network drivers. The airplane mode is turned on. Antivirus inference. Faulty VPN. Misconfigured Wi-Fi adapter settings. Unstable Internet connection.

Basic Troubleshooting Tips

Before going through the advanced methods to fix no WiFi networks found in Windows 10, follow these basic troubleshooting tips. 

Restart your computer. Create a hotspot on your phone and try to connect to it. Connect to Wi-Fi with another device in your house, such as a smartphone. It makes no difference whether you use Windows 10 or another operating system. Try moving your workstation or adding more access points to your network to increase the router’s signal. If required, restart your router. For a few seconds, press and hold the power button. Allow at least 30 seconds to elapse before proceeding. Press the power button once more to turn it back on. Check that Wi-Fi is turned on in Windows 10. Check to see whether your laptop is in Airplane Mode. Press the Windows key. Select the Settings option from the drop-down list. Go to Network & Internet and disable Airplane Mode if it is enabled.

Note: We recommend reading these instructions on a second device before continuing. It should be linked to the Internet only if your primary Windows 10 PC loses internet connectivity.

Method 1: Run Internet Connections Troubleshooter

You may also use the troubleshooter to determine if your hardware is malfunctioning. You can run the troubleshooter by following the steps to fix no WiFi networks found on Windows 10.

  1. Press Windows + I keys simultaneously to launch Settings.

  2. Click on the Update & Security tile, as shown.

  3. Go to Troubleshoot menu from the left pane.

  4. Select Internet Connections and click on the Run the troubleshooter button as highlighted below.

  5. Choose the Troubleshoot my connection to the Internet option.

  6. Wait for the troubleshooter to detect problems.

  7. Follow on-screen instructions to troubleshoot. Once the process is complete, restart your PC. Also Read: Fix Incorrect PSK Provided for Network SSID on Windows 10

Method 2: Run Network Adapter Troubleshooter

The network adapter troubleshooter, similar to the Internet Connections troubleshooter, may also be of assistance. So, follow these steps to fix no WiFi networks found in Windows 10.

  1. Open Settings and select Update & security.

  2. Go to Troubleshoot menu from the left pane and locate Find and fix other problems in right pane.

  3. Select Network Adapter troubleshooter and click on Run the troubleshooter button shown highlighted.

  4. Select All network adapters and click Next.

  5. If there is an issue, click on Apply this fix and follow the instructions given in the successive prompts. Also Read: How to Setup Network Files Sharing on Windows 10

Method 3: Update Drivers

If your problem of no Wi-Fi networks found began as soon as you installed Windows 10, your present drivers are most likely incompatible with Windows 10. Your laptop may also be unable to see accessible networks due to an outdated network driver. Install any available network adapter driver updates by following the below steps.

  1. Press Windows key, type Device Manager and click on Open.

  2. Double-click on the Network adapters.

  3. Right-click on your Wi-Fi device. Click on Update driver.

  4. Select Search automatically for drivers.

5A. If a new driver is discovered, the system will install it automatically. 5B. If the driver is update-to-date, then it will display The best drivers for your device are already installed.

  1. Select Search for updated drivers on Windows Update to check for updates manually.

  2. Select View optional updates in the Windows Update screen.

  3. Select the drivers you want to install by checking the boxes next to them, then clicking the Download and Install button.

Method 4: Roll Back Wi-Fi Adapter Drivers

If the issue of no Wi-Fi networks found began after a recent Windows update, or if your old drivers were in good working order before you updated them, you’ll have to revert to an older version of the driver in that instance. To roll back your Wi-Fi driver, follow these steps:

  1. Open Device Manager from the Windows search menu.

  2. Expand the area titled Network adapters by double-clicking it in Device Manager.

  3. Right-click your WLAN card device and select Properties.

  4. Go to the Driver tab and select Rollback Driver. Note: If the Rollback driver option is greyed out, you can skip this method. The option is greyed if the previous version of the driver is not available.

  5. Allow the rollback to occur. Restart your PC. Also Read: Fix Ethernet Doesn’t Have a Valid IP Configuration Error

Method 5: Reinstall Current Wi-Fi Adapters

If rolling back the Wi-Fi driver doesn’t work, try reinstalling it to see if it solves the problem of no Wi-Fi networks found Windows 10. This method will replace any defective or corrupt drivers with the appropriate ones.

  1. Launch Device Manager from the Windows search menu.

  2. Expand the area titled Network adapters by double-clicking in Device Manager.

  3. Right-click your WLAN card device and select Uninstall device.

  4. Check the box Delete the driver software for this device and click Uninstall.

  5. Restart the PC after uninstalling the driver.

  6. Visit the manufacturer’s website ( e.g. Intel) to download the driver manually.

Method 6: Change Adapter Settings

Otherwise, your computer will be unable to connect to your network because the region settings on your Wi-Fi adapter do not match those on your Wi-Fi router. To change the region, do the following:

  1. Go to Device Manager from Windows search menu.

  2. Expand the area titled Network adapters by double-clicking it in Device Manager.

  3. Right-click your WLAN card device and select Properties.

  4. Select Channel Width for 2.4 GHz in the Property box.

  5. Set the Value as Auto. Note 1: Some Wi-Fi routers may not handle 5 GHz, so try an alternative combination. Note 2: This feature isn’t available on all Wi-Fi adapters. For some, it’s in the Channels Number attribute or something similar.

  6. Click OK. Also Read: Fix Windows could not automatically detect this Network’s Proxy settings

Method 7: Reset Network Adapter

It’s possible that your network adapter is suffering issues that a system restart won’t cure. Resetting it is an excellent option in this scenario. Several people claim that resetting the Wi-Fi network adapter on their Windows 10 laptops helped them solve various Wi-Fi issues like no Wi-Fi networks found.

  1. Press Windows + I keys to launch Windows Settings.

  2. Navigate to the Network and Internet section of the settings menu.

  3. Click the Network Reset option at the bottom.

  4. Finally, confirm the prompt by clicking on Reset now as shown.

Method 8: Enable Hidden SSID

It’s conceivable that the network you wish to join has a concealed SSID or name. You must first contact your system administrator to obtain the name and password to connect to it. Once you know both, you can connect to it.

  1. Navigate to the Windows Settings.

  2. Navigate to the Network and Internet settings.

  3. Navigate to the Wi-Fi tab. Select Manage known networks.

  4. Select Add a new Network.

  5. Enter the network name, security type, and password in the pop-up box that appears. Click Save.

Also Read: Fix Computers Not Showing Up on Network in Windows 10

Method 9: Disable Faulty VPN

If not used properly, a VPN, whether it’s a VPN connection you manually set up on Windows or a commercial VPN service that auto-configures network settings, can influence your Wi-Fi connection.

Turn off any VPN services you’re using, restart your computer, and look for networks. Connect to one of the networks after they appear, and then re-enable the VPN service. If your connection vanishes or stops working after you enable the VPN, check to see if your ISP or your country blocks the service you’re using. Try a different VPN service or one that restricts your browser or a single program rather than the complete system network activity. After the troubleshooter has finished, see if the problem of no Wi-Fi networks Windows 10 still exists.

Method 10: Run Malware Scan

Some malware agents are clever enough to infiltrate your computer and block you from connecting to the Internet. To discover and delete any bugs, the best action plan is to perform a comprehensive system scan. Follow the below steps.

  1. Press and hold the Windows + I keys together to open Windows Settings.

  2. Now, select the Update & Security link, as shown.

  3. Then, navigate to Windows Security in the left pane.

  4. Now, click on Virus & threat protection under Protection areas as depicted.

  5. Then, click on Scan Options, as shown.

  6. You can choose Quick scan, Full scan, Custom scan, or Microsoft Defender Offline scan according to your need and click on Scan Now as highlighted.

7A. If there are any threats, click on Start Actions under Current threats.

7B. If your computer does not have any threats, the No current threats prompt will pop up as highlighted below.

To protect you from incoming assaults, your firewall may not allow any Internet connection if it has severe regulations. It’s also possible that this is why your Windows 10 PC cannot detect any Wi-Fi networks. For the time being, here’s how to turn it off to fix no WiFi networks found in Windows 10. Note: Here Avast Antivirus is shown as example. The steps and procedure may vary depending on the antivirus software.

  1. Navigate to the Antivirus icon in the Taskbar and right-click on it.

  2. Now, select the Avast shields control option.

  3. Choose the option according to your convenience and confirm the prompt displayed on the screen.

Disable for 10 minutes Disable for 1 hour Disable until computer is restarted Disable permanently

Note: Now, go back to the main window. Here, you have turned off all the shields from Avast. To activate the settings, click on TURN ON.

Also Read: Fix Windows 10 Netwtw04.sys Blue Screen Error

Method 12: Modify Services Configuration

Ensure that the services settings are appropriately configured to resolve no WiFi networks found on Windows 10 issue. Follow the below steps.

  1. Press Windows + R keys simultaneously to launch the Run dialog box.

  2. Type services.msc and press Enter key.

  3. Scroll down and double-click Network Location Awareness.

  4. Set the Startup type to Automatic. Click Apply and then OK.

  5. Similarly, set the startup types for the following services.

Network List Service-Manual Windows Event Log-Automatic Windows Update-Manual WLAN AutoConfig-Automatic Radio Management Service-Manual

  1. After changing for all the above services, close the Services window.

Method 13: Turn On Network Discovery

Sometimes, Network Discovery options would have turned off, leading to this issue. Turn on Network Discovery by implementing the below steps to fix no WiFi networks found in Windows 10.

  1. Hit the Windows key. Type Control Panel and open it.

  2. Set the View by as Category. Select Network and Internet.

  3. Select Network and Sharing Center.

  4. Click Change advanced sharing settings.

  5. Check the option Turn on network discovery and click Save Changes. Note: To make this change, you should have admin rights.

Method 14: Contact Network Administrator

The network access of a system can be controlled. This is accomplished by blocking its MAC address in the router. It’s also conceivable that only specific MAC addresses join a network. This is most often the case with a business network, such as the one used at work. Contact the network administrator and request that your system be added to the allowed systems list. If you’re experiencing problems connecting to a home network, use a LAN cable to connect to the router and manually input your system MAC address. Depending on the router you have, the procedure will be different. Recommended:

How to Reset Network Settings on Windows 10 How to Disable VPN and Proxy on Windows 10 How to Troubleshoot Network Connectivity Problems on Windows 10 How to Change Chrome as Default Browser

We hope you found this information helpful and that you could resolve how to fix no Wi-Fi networks found in Windows 10. Please tell us which method worked best for you. If you have any questions or comments, please leave them in the comment section below. Let us know what you want to learn about next.

Fix No WiFi Networks Found in Windows 10 - 1Fix No WiFi Networks Found in Windows 10 - 77Fix No WiFi Networks Found in Windows 10 - 68Fix No WiFi Networks Found in Windows 10 - 88Fix No WiFi Networks Found in Windows 10 - 92Fix No WiFi Networks Found in Windows 10 - 77Fix No WiFi Networks Found in Windows 10 - 27Fix No WiFi Networks Found in Windows 10 - 94Fix No WiFi Networks Found in Windows 10 - 22Fix No WiFi Networks Found in Windows 10 - 45Fix No WiFi Networks Found in Windows 10 - 47Fix No WiFi Networks Found in Windows 10 - 2Fix No WiFi Networks Found in Windows 10 - 36Fix No WiFi Networks Found in Windows 10 - 77Fix No WiFi Networks Found in Windows 10 - 35Fix No WiFi Networks Found in Windows 10 - 6Fix No WiFi Networks Found in Windows 10 - 55Fix No WiFi Networks Found in Windows 10 - 65Fix No WiFi Networks Found in Windows 10 - 23Fix No WiFi Networks Found in Windows 10 - 71Fix No WiFi Networks Found in Windows 10 - 86Fix No WiFi Networks Found in Windows 10 - 67Fix No WiFi Networks Found in Windows 10 - 30Fix No WiFi Networks Found in Windows 10 - 83Fix No WiFi Networks Found in Windows 10 - 21Fix No WiFi Networks Found in Windows 10 - 80Fix No WiFi Networks Found in Windows 10 - 88Fix No WiFi Networks Found in Windows 10 - 86Fix No WiFi Networks Found in Windows 10 - 11Fix No WiFi Networks Found in Windows 10 - 95Fix No WiFi Networks Found in Windows 10 - 68Fix No WiFi Networks Found in Windows 10 - 66Fix No WiFi Networks Found in Windows 10 - 87Fix No WiFi Networks Found in Windows 10 - 56Fix No WiFi Networks Found in Windows 10 - 20Fix No WiFi Networks Found in Windows 10 - 46Fix No WiFi Networks Found in Windows 10 - 82Fix No WiFi Networks Found in Windows 10 - 80Fix No WiFi Networks Found in Windows 10 - 23Fix No WiFi Networks Found in Windows 10 - 7Fix No WiFi Networks Found in Windows 10 - 77Fix No WiFi Networks Found in Windows 10 - 3Fix No WiFi Networks Found in Windows 10 - 20Fix No WiFi Networks Found in Windows 10 - 98Fix No WiFi Networks Found in Windows 10 - 61Fix No WiFi Networks Found in Windows 10 - 45Fix No WiFi Networks Found in Windows 10 - 70Fix No WiFi Networks Found in Windows 10 - 19Fix No WiFi Networks Found in Windows 10 - 26Fix No WiFi Networks Found in Windows 10 - 22Fix No WiFi Networks Found in Windows 10 - 56Fix No WiFi Networks Found in Windows 10 - 62Fix No WiFi Networks Found in Windows 10 - 73Fix No WiFi Networks Found in Windows 10 - 8Fix No WiFi Networks Found in Windows 10 - 81